Cameo OTOS SP6 Bedienungsanleitung Seite 20

Starting from the main display, press MENU to enter the main menu. Using  and , select the
Control menu, confirm, then select Stand Alone and confirm again. Now select Edit Scene,
confirm, select the desired scene and confirm again.
The scene is activated when confirmed and you can make the settings as desired (see table,
select with  and  confirm with ENTER, change value or status with  and  confirm with
ENTER).
Edit Scene
Pan 000 – 255 0-100
Tilt 000 – 255 0-100
Dimmer 000 – 255 Master dimmer 0% -> 100%
Strobe 000 – 255 Multi-functional strobe
Cyan 000 – 255
Magenta 000 – 255
Yellow 000 – 255
CTO 000 – 255 Colour Transmission Orange
Colour wheel 000 – 255 Colour wheel
Gobo 000 – 255 Gobo wheel 1
Gobo rot. 000 – 255 Gobo wheel 1 Gobo rotation
red Fine 000 – 255 Gobo wheel 1 Gobo rotation fine
Gobo2 000 – 255 Gobo wheel 2
Zoomz 000 – 255 Zoom narrow <-> wide
Focus 000 – 255 0-100
Iris 000 – 255 0-100
Prism 000 – 255 Prism
Prism red. 000 – 255 (Prism rotation)
Frost1 000 – 255 Frost 1 0% <-> 100%
Frost2 000 – 255 Frost 2 0% <-> 100%
Animation 000 – 255 Animation wheel
20
CMY