System Information - Cameo OTOS SP6 Bedienungsanleitung

Test Engine Test
LED Calibration 0–255
No
Reset Service
Timer
Reset now
Password For service purposes only

SYSTEM INFORMATION

Starting from the main display, press MENU to enter the main menu. Select System Info using
 and  and confirm with ENTER.
Information on the submenu items in the system info menu and the corresponding options can be
found in the table below (select with  and  confirm with ENTER, change value or status with
 and  confirm with ENTER)
System Info
DISP
LED
Firmware
CTR1 engine
...
LED
Base
Temperature ...
Temperature unit
Fan Speed xxxx RPM
Total
Operation
Runtime
LED
Service
MAC Address xxx.xxx.xxx.xxx.xxx
RDM-UID RDM Unique Identifier
Pan
Run the selected engine. Motor stops when selecting
Tilt
another motor and when leaving the menu level.
...
Setting the maximum brightness across operating modes
Cancel operation
Reset service operation time
Vx.x.x
Vx.x.x
Vx.x.x
Vx.x.x
xxx °C / °F
xxx °C / °F
°C
°F
Display of the speed of the corresponding fan
xxxx h : xx m
xxxx h : xx m
xxxx h : xx m
xxxx h : xx m
MAC address
Display of the firmware version of the
corresponding component
Display of the temperature of the
corresponding component
Setting the temperature unit
Total operating time
Usable time
Lamp operating time
Operating time after resetting the
service operating time
27