Cameo OTOS SP6 Bedienungsanleitung Seite 14

The battery-powered display can be activated, even if the device is not connected to
the mains. To do this, press and hold MENU for about 10 seconds. You can now access
device information to change and save system settings without mains connection.
External control of the spotlight is not activated in this case. For this reason, the display
shows that there is no DMX signal even if a DMX signal is available at the device.
LOCK
14
9
UNLOCK
LOCK
10
UNLOCK
11
9
PAN LOCK
Mechanical locking device to prevent the head
from turning on the horizontal plane during
transport (8 possible positions). Disconnect
the unit from the mains and slide the locking
lever in the direction of the pan rotation axis,
moving the head of the unit horizontally until
one of the 8 locking positions is found and
the locking lever engages. Unlock the device
before startup (UNLOCK).
10 TILT LOCK
Mechanical locking device to prevent the
head from turning on the vertical plane during
transport (7 possible positions). Disconnect the
unit from the mains and slide the locking lever
in the direction of the tilt rotation axis, moving
the head of the unit vertically until one of the 7
locking positions is found and the locking lever
engages (LOCK). Unlock the device before
startup (UNLOCK).
11