System Settings (Set) - Cameo FLAT STAR Bedienungsanleitung

STATIC MODE (StAt)
The static mode enables you to adjust the brightness of the 6 colours of the RGBWA+UV centre LEDs separately and thus create an almost
unlimited number of different colours (colour mixing). In addition, one of the 7 colour presets (7 presets + blackout) of the SMD LED ring
can be activated. From the main menu, use UP and DOWN to select the menu item ModE, confirm with ENTER and then use UP and DOWN
to select the menu item StAt and confirm with ENTER. Now you can use the UP and DOWN buttons to adjust the overall brightness of the
centre LEDs from di00 to di99. Press ENTER to confirm. Now adjust the brightness for red, green, blue, white, amber and UV in the same
way. After the setting for UV is confirmed with the ENTER key, one of the seven colour presets for the SMD-LED can be selected with the UP
and DOWN buttons (SMd0 = blackout, 1 = red, 2 = green, 3 = blue, 4 = yellow, 5 = magenta, 6 = cyan, 7 = white). Confirm with ENTER.
Dimmer
-> ENTER ->
UP/DOWN
Amber
UP/DOWN

SYSTEM SETTINGS (SEt)

The menu item System settings enables shut-down of the display, display of mode status in the event of DMX signal fault, configuration of
the spotlight in music-controlled programmes mode and reset of all settings. Use UP and DOWN to select the menu item SEt from the main
menu and confirm with ENTER. Now select the desired menu item with UP and DOWN and edit it as required (select with UP and DOWN,
press ENTER).
-> ENTER ->
UP/DOWN
<- MODE
System settings (Set)
diSP = Display shutdown
FAiL = operating status with DMX signal fault
Operation of the spotlight in music-controlled
Soun =
programmes when silent
rESt = reset to factory settings
Red
-> ENTER -> -> ENTER ->
<- MODE <- MODE
UP/DOWN
UV
-> ENTER -> -> ENTER ->
<- MODE <- MODE
UP/DOWN
-> ENTER ->
UP/DOWN
<- MODE
/
-> ENTER ->
UP/DOWN
<- MODE
/
-> ENTER ->
UP/DOWN
<- MODE
/
-> ENTER ->
UP/DOWN
<- MODE
Blue
Green
-> ENTER ->
<- MODE
UP/DOWN UP/DOWN
PRESET
-> ENTER
<- MODE
UP/DOWN
/
/
/
/
on = display shuts down after approx. 30 seconds of
inactivity
oFF = Display shutdown disabled
hoLd = last DMX command will be retained
bLAc = Blackout
LASt = The last scene will be retained
oFF = Blackout
no = Do not perform reset by pressing ENTER
YES = Perform reset by pressing ENTER
White
-> ENTER -> -> ENTER ->
<- MODE <- MODE
UP/DOWN
-> ENTER
-> ENTER
-> ENTER
-> ENTER
9