System Settings (Settings) - Cameo EVOS W3 Bedienungsanleitung

SYSTEM SETTINGS (Settings)

Starting from the main display, press the push-button rotary encoder to navigate to the main menu. Turn the encoder to access the menu for
the system settings Settings and then press the encoder.
Main Menu
Control
Settings
Info
Service
Quick-Light
This will take you to the submenu for setting the submenu items, see table:
Main Menu
Control
Rotate the encoder to select, press the encoder to confirm, rotate to change value or status, press to confirm. Return with
Settings
Display Display settings
Info
Service
Quick-Light
Main Menu
Control
Settings
Signal Fail Operating status
if control signal
Info
is lost
Service
Quick-Light
Main Menu
Control
Settings
Info
Service
Quick-Light
Display
Signal Fail
Dimmer
Color Calibration
Pan/Tilt Motors
Fan Settings
Auto Lock
Default
Settings (bold = factory setting)
Firmware
Temperature
Fan Speed

Runtime
Flip 
RDM UID, MAC, NET
Floor Use
DMX Values
Rig Use
Error Info
DMX Tables
Off after 1 min. 
1 Minute Off
Always On
Reset
Intensity 001–010
Contrast 001–010
Test

Password
Hold Latest Last command is held
Value
Run Scene 1 Activates Scene 1
Blackout Activates blackout
Pan
Tilt
Dimmer
Hue
Saturation
Color Temperature
Zoom
Settings
Info
Display does not rotate
Display rotates by 180° (when installed
overhead)
Deactivates display backlight after approx. 1
minute of inactivity
Service
Display backlight permanently on
Display brightness
Display contrast
Quick-Light

.
19