Setup And Installation; Care, Maintenance And Repair - Cameo OTOS SP6 Bedienungsanleitung

SETUP AND INSTALLATION

Overhead mounting requires extensive experience, including the calculation of the
load limit values of the installation material and regular safety inspection of all instal-
lation materials and spotlights. If you do not have these qualifications, do not attempt
to perform an installation yourself. Refer instead to a qualified professional. There is
a risk that devices that are incorrectly mounted and secured may come loose and
fall down. This can cause serious injury or death.
Thanks to its integrated rubber feet, the lamp can be positioned in a suitable location on a level
surface. Traverse installation can be achieved with the help of two Omega brackets, which are
attached to the base of the device (A). 2 x Omega brackets are included. Suitable beam clamps
are available as an option. Ensure firm connections and secure the spotlight to the securing lug
(B) with a suitable safety cable.

CARE, MAINTENANCE AND REPAIR

In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, maintained. The maintenance requirement depends on the intensity of use and
the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating
hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may
be limited in the event of defects resulting from inadequate maintenance.
CARE (carried out by user)
WARNING! Before carrying out any care or maintenance, the power supply – and, if
possible, all device connections – must be disconnected.
B
A
A
29