turck FM-IM Serie Betriebsanleitung Seite 79

The flow value is stored.
The entire LED-band will be green for 1 s, afterward the flow value is stored
➥ ➤
and setting of the switchpoint of temperature monitoring (SP Temp) starts.
Pwr Flow Temp Fault
Figure 11: LED-displays during the display range setting procedure
Switchpoint setting of temperature monitoring (SP Temp)
➤ You completed the display range setting (MAX/MIN trim), or push the
➤
"Mode" button in the display mode twice.
Switchpoint setting of temperature monitoring (SP Temp) starts; the display
is yellow.
The rest of the procedure is the same as the one for devices with switching
output, see p. 30.
more@turck.com • www.turck.com • 2012/12
5 s 5 s
S S
too high acc. small
Flow
5 s 5 s
S
too high acc. small
Flow
(MAX/MIN trim), value setting comparable to the display range
setting for devices with switching output, see p. 29.
Setting and Parametrization
save 1 s
E
save 1 s
E
35