Electrical Connection For A 3-Wire Test Item - WIKA CPH6000 Betriebsanleitung

6. Commissioning, operation
▶ With its own power supply available
EN

6.2.5 Electrical connection for a 3-wire test item

Before connecting a test item, the instructions in chapter 4.2 "Electrical connections" should be read and then followed.
Example:
Wiring diagram of a pressure sensor from WIKA (3-wire connection) which
must be checked/calibrated.
Example
Test item is a pressure sensor from WIKA with a mA signal:
▶
Without its own power supply, the DC 24 V voltage must be activated via the menu (see chapter 6.8 "Operating modes")
24
+
Voltage supply
-
WIKA operating instructions, pressure calibrator model CPH6000