General Information - WIKA CPH6000 Betriebsanleitung

1. General information

1. General information
The model CPH6000 pressure calibrator described in the operating instructions has been manufactured using state-
■
of-the-art technology. All components are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
EN
These operating instructions contain important information on handling the instrument. Working safely requires that all
■
safety instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and general safety regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept in the immediate vicinity of the instrument and
■
readily accessible to skilled personnel at any time. Pass the operating instructions on to the next operator or owner of the
instrument.
Skilled personnel must have carefully read and understood the operating instructions prior to beginning any work.
■
The general terms and conditions contained in the sales documentation shall apply.
■
Subject to technical modifications.
■
Factory calibrations / DAkkS calibrations are carried out in accordance with international standards.
■
Further information:
■
- Internet address:
- Relevant data sheet:
- Application consultant:
Abbreviations, definitions
2-wire
3-wire
UB
S+
■
▶
1. ... x.
⇒
→
6
The two connection leads are used for the voltage supply.
The measuring signal also provides the supply current.
Two connection leads are used for the voltage supply.
One connection lead is used for the measuring signal.
Positive power supply terminal
Positive output terminal
Bullet
Instruction
Follow the instruction step by step
Result of an instruction
See ... cross-references
www.wika.de / www.wika.com
CT 15.01
Tel.: +49 9372 132-0
info@wika.de
WIKA operating instructions, pressure calibrator model CPH6000