WIKA CPH6000 Betriebsanleitung Seite 29

6. Commissioning, operation
Reference sensor
6
Data for the currently connected reference pressure sensor
Measuring range
■
Accuracy class
■
Pressure type of the sensor
■
Information in the event of reference sensor overpressure
■
Calibration data for the reference sensor
■
→ See chapter 6.9.3 "Reference sensor"
Reference sensor list
7
List of the stored reference sensors, that can be attached and are calibrated.
→ See chapter 6.9.4 "Ref. sensor list"
CPH configuration
8
Info: on battery level
■
Setting options from: Menu language, system time/system clock, display brightness, PowerSave function (automatic
■
energy saving mode; see chapter 6.9.5 "CPH configuration")
Input options:
■
- Ambient temperature during the calibration
- Height difference existing between the reference pressure sensor and test item (see chapter 6.3 "Test assembly").
→ See chapter 6.9.5 "CPH configuration"
Interface
9
Interface, incl. setting of the baud rate
→ See chapter 6.9.6 "Interface"
CLEAR CalProg
10
Delete all stored calibration data (clear and reset all memory space)
→ Also see chapter 6.9.7 "CLEAR CalProg"
Switching off the CPH
11
Switching off the model CPH6000 pressure calibrator
→ See chapter 6.1.2 "Switching the pressure calibrator off"
WIKA operating instructions, pressure calibrator model CPH6000
EN
29