Electrical Connection - WIKA CPH6000 Betriebsanleitung

4. Design and function

4.5.2 Electrical connection

The connection between CPH6000 and CPT6000 is achieved with a sensor connection cable via an M12 x 1.5 circular
connector with screw-on lid.
For external operation/use of the CPT6000 reference pressure sensor, only use a maximum of one cable.
■
EN
The length of the cable is approx. 1.1 m [3.61 ft].
■
Only ever use the original sensor connection cable from WIKA for the operation of CPT6000 reference pressure
sensors. The cable can be found in Accessories, see chapter 11 "Accessories".
Connection cable for CPT6000
reference pressure sensor
18
Extension cable
WIKA operating instructions, pressure calibrator model CPH6000