Setting up and connecting
EN
First steps
Determine where you will install the
water fi ltration system and faucet. With
66-11, you also determine where the sto-
rage pressure tank should be located.
The faucet should be easily accessible
●
and simple to use.
The plastic hoses should have a
●
simple pathway (risk of buckling).
The BestWater water fi ltration system
●
and der water stopper on the corner
valve should be easily visible and
usable upon installation.
The storage pressure tank should
●
JUNGBRUNNEN
have a fi xed a fi xed location with
suffi cient space (only 66-11)
66-10/11
Conduct a trial installation in which all of
the elements are placed in their intended
positions. Install the unit as described on
the following pages. The necessary con-
nections are, in order:
Faucet
●
Drain clamp
●
Water stopper
●
Water line
●
Water fi lter
●
Stored pressure tank
●
Connect the connections made to the
connections to the BestWater system.
Start up the BestWater system into ope-
ration.
62
The BestWater system must stand
plumb and even on all feet to ensure pro-
per operation. Improper placement will
reduce water output and increase energy
consumption.