BestWater Jungbrunnen 66-10 Gebrauchsanleitung Seite 99

Aerators
To clean the above watercourse and the
two aerators, unscrew the aerators using
the corresponding aerator keys (inclu-
ded with initial delivery).
Unscrew the aerators with the corresponding key
You can clean the aerators with a vinegar
JUNGBRUNNEN
solution (observe mixing ratio) or a lime
cleaner, whereby we recommend a
66-10/11
cleaning bath. In this case, the existing
seals or O-rings must be removed be-
forehand.
Remove the sealing rings from the aerators before cleaning
Place aerators in a cleaning solution
Now you can remove any deposits on
the surface of the above spout (direct-
ly on the aerators). Normally, a kitchen
sponge or fi ne sandpaper (220-1000) is
suffi cient for cleaning.
Maintenance of the BestWater system
Clean the outlet with a sponge or fine sandpaper
After the successful cleaning process of
the aerators, you can screw them back in
after putting on the seals or O-rings.
Attach sealing rings back to the aerators
Screw in the aerators with the corresponding key
After that, the cleaning of the three way
faucet is fi nished and you can use the
tap as usual.
The aerators must not be screwed in as
far as they will go, this can lead to mal-
functions within the BestWater system.
EN
99