BestWater Jungbrunnen 66-10 Gebrauchsanleitung Seite 84

Operation of the system
EN
rinse permeate
ESC <-
Press the ESC key
lection menu. As soon as the rinsing the
system automatically returns to the back
to the operating mode menu.
If the (+) button is pressed a second time,
you can perform a membrane rinse.
The display then shows the following
message on the display:
Membrane rinsing
JUNGBRUNNEN
run
66-10/11
ESC <-
If you select membrane rinsing with the
OK button, the system rinses the memb-
rane. the membrane.
rinse Membrane
ESC <-
Press the ESC key
tion menu. As soon as the rinsing rin-
sing is fi nished, the system automatically
back to the operating mode menu.
Empty tank
The function "Empty tank" can only be
selected for the Jungbrunnen 66-11.
If you are in the operating mode menu,
you can select the Empty tank program-
me with the (+) or (-) key and confi rm
your selection with the
84
– Jungbrunnen 66-10 / 66-11
00030%
to return to the the se-
-> OK
00056%
to return to the selec-
OK key.
Empty the tank
ESC <-
The tank is completely emptied after se-
lection with the OK button. The following
message appears on the display:
Empty the tank
withdrawal tap
MUST BE OPEN!
ESC <-
If no more water comes out of the tap,
you must press the tap, you must exit
the programme again with the
ESC key to exit the programme. If you do
not press the ESC key, the text appears
on the display appears on the display un-
til the ESC key is pressed, until the
key is pressed. You now return to the
operating mode menu.
E-Test, Functions
With the programme E-Test, Functions
you can carry out an electrical test of
the system and check whether all func-
tions whether all functions are working
properly.
To do this, select the programme in the
operating mode menu use the (+) or
(-) key to select the programme E-Test,
Functions and confi rm your selection
confi rm your selection with the
E-Test, functions
ESC <-
-> OK
ESC
OK key.
-> OK