Operating Modes - BestWater Jungbrunnen 66-10 Gebrauchsanleitung

Operation of the system
By selecting the operating mode "Perme-
ate production" and confi rming with the
OK button, the system is reactivated. If
the unit was deactivated for more than
15 minutes, the next water withdrawal
begins with a rinsing programme. As
soon as this is fi nished, the BestWater
system resumes standard operation.

Operating modes

OPERATING mode:
SELECT DISPLAY
WITH "+" OR
JUNGBRUNNEN
The unit control has two menu levels:
66-10/11
Level A for operating mode and Level
B for operating data, which can be ac-
cessed via the keys of the same name.
keys (A) and (B).
Level A is activated in the delivery state.
Deactivation is done by the alternative
letter (B).
You can activate the following operating
modes:
Permeate production
●
Rinse programmes (setting rinse
●
times and performing extra rinses).
Empty tank (66-11 only)
●
E-test, functions (function test of
●
LEDs and actuators).
Preparation for maintenance
●
Commissioning see chapter IB
●
By pressing the (+) or (-) button you can
select the individual operating modes
and confi rm your selection with the
key.
If you press the (+) key once in the ope-
– Jungbrunnen 66-10 / 66-11
rating mode menu, Permeate produc-
tion appears.
Permeate production produces the pu-
rest drinking water. If you press the (+)
key again, you can select the "Rinsing
programmes" and confi rm with the
key.
"-"
Under Rinse programmes you can
change rinse times for the individual rin-
se types and carry out individual rinse
types manually.
Press the (+) button again to empty the
tank (only Jungbrunnen 66-11) and con-
fi rm with the
Press the (+) key one more time and you
will get to the E-Test programme, Func-
tions. You can confi rm this with the
key.
With the E-Test you can test all electrical
OK components of the system for their func-
tions. When you press the (+) key again
you can select the preparation Mainte-
nance and confi rm with the
Permeat production
ESC <- -> OK
Rinse programmes
ESC <- -> OK
OK button.
Empty tank
ESC <- -> OK
E-Test, functions
ESC <- -> OK
EN
OK
OK
OK key.
81