BestWater Jungbrunnen 66-10 Gebrauchsanleitung Seite 83

Operation of the system
play shows the following message:
00015 Sek 00015 Sek
Permeate rinsing-
time permeate
ESC < -
The rinsing time is at the top left of the
display. Press the OK button
lect the time.
The time will now fl ash and can be chan-
ged between 15 and 300 seconds with
the (+) or (-) key. Less than 15 seconds
is not available to protect the system
from possible damage.
JUNGBRUNNEN
Operation of the Jungbrunnen 66-10 / 11
Then confi rm the selection with the
66-10/11
button. If the (+) button is pressed once
more button a second time, you can
change the time of the membrane rin-
sing.
rinse Membrane
rinse-time select
ESC <-
Now press the OK key
to set the membrane rinsing time manu-
ally. The display shows the following
message:
00015 Sek 00015 Sek
Membrane rinsing-
time Membrane
ESC <-
The rinsing time is at the top left of the
of the display. Press the
to select the time.
The time will now fl ash and can be chan-
ged with (+) or (-) button between 15 and
300 seconds. Less than 15 seconds is
not available to to protect the system
from possible damage. from possible
- > OK
once to se-
OK
-> OK
once, button once
-> OK
OK button once,
– Jungbrunnen 66-10 / 66-11
damage. Confi rm then confi rm the se-
lection with the OK button. If the (+) but-
ton is pressed a second time, you can
you can change the time of the change
the rinse time.
rinsing
rinse-time select
ESC <-
Now press the OK button
once to set the rinse time manually. The
display shows the following message:
00015 Sek 00015 Sek
rinsing time
select
ESC <-
The rinsing time is located at the top
left of the display. Press the
once to select the time. The time will now
fl ash and can be changed between 15
and 300 seconds with the (+) or (-) but-
ton. Less than 15 seconds is not availa-
ble to protect the system from possible
damage. Confi rm the selection with the
OK button. With the
programme and return to the operating
mode menu.
If the (+) key is pressed once more after
the rinse is pressed again after the rinse,
you can perform the permeate rinse.
The following message appears on the
display:
Permeate rinsing
run
ESC <-
As soon as the selection is confi rmed
OK button
with the the system rinses the
permeate.
-> OK
once, button
-> OK
OK button
ESC key to exit the
-> OK
83
EN
Plea
ned