DriveTest FM200 Handbuch Seite 97

Drive Test GmbH München
10 APPENDIX
10.1 ERROR MESSAGES DISPLAY UNIT
Display Service
E:0x Protocol error
E:1x Serial interface error (x: Bit0=Parity, Bit1=Framing, Bit2=Overflow)
E:18 Baudrate error
E:20 Sensor connector change
E:21 Wrong sensor (version conflict)
E:30 Sensor supply error
Bit0=IES invalid, Bit1=IES instable, Bit2=DMS invalid, Bit3=DMS instable, Bit4=timeout
C:xx xx format is decimal, has to be converted into binary format
E:31 Missing measure data (Time Out)
E:32 Low Bat
E:40 LCD - test error
n Number of successfully tests
E:41 SRAM memory fast test error
n Number of successfully tests
E:42 SRAM memory test error
3:xx Hexadecimal number of errors MSB
2:xx, 1:xx ..
0:xx Hexadecimal number of errors LSB
E:43 EEPROM test error
nn Number of error bytes
E:44 EEPROM system parameter initialisation error
nn Number of error bytes
E:45 EEPROM test error sensor data
nn Number of error bytes
E:46 EEPOROM initialisation error sensor data
nn Number of error bytes
E:47 A/D-converter does not react
n Number of successful tests
E:48 Real Time Clock does not react
C:00 Data line constantly 0
C:01 Data line constantly 1
E:50 Message Queue overflow
E:51 Queue for schedule data overflow
E:52 Queue for long term messages overflow
E:53 System died (Watchdog)
E:54 Stack overflow
E:55 Serial transmit data overflow
E:60 Bus arbitration error
C:xx Demanding client
B:xx Actual bus activity
E:70 Overflow force measure data
E:71 Overflow position measure data
E:80 Access violation SRAM
C:01 memory address invalid
C:02 Bloc length invalid
C:03 Bloc out of valid range
C:04 SRAM-address invalid
C:05 SRAM-length invalid
C:06 SRAM-overflow
C:07 Align – error
E:81 Access violation at EEPROM
C:0x Error code, see E:80
E:82 Memory Access violation
C:0x Error code, see E:80
E:88 EEPROM does not react (not busy)
C:0x 0 = system parameter, 1 = sensor data
E:89 EEPROM does not react no longer (constantly busy)
C:0x 0 = system parameter, 1 = sensor data
E:8A Denied write access on EEPROM for sensor data
E:FF Error cause unknown
(*) with service button additional error code is available
Version 7.1
Handbuch / Manual FM200
Meaning
Seite 97 von 99
Archive: FM200_DE_EN_V7.1