Software Maintenance; Software Plug-Ins - Drivetest Fm200 Handbuch

Drive Test GmbH München
For settings for measuring mode please see the following table (Tab. 5.3):
Setting Meaning
Limit Limit to be used
Autom. Upload Automatic upload at the end of a
measurement
Modus No. of measurements per
measuring point
Auto sequence Automatic start of subsequent
measurements
Averaging Averaging of force *
Result Saving of measurements
* Setting of averaging time refer to "Extras/ Options/ Display/ Averaging"
The measurement can be started as soon as the PC starts communicating with the display
unit and the ready state is indicated.
A normal measurement is initiated by clicking the start button which has the same function as
the operating button of the display unit. The measurement process complies with the one of
the normal measurement. The saving of the measurement depends on the result setting.
A permanent measurement is started by the "Permanent" button. Here the values are
displayed but not saved.
5.8

SOFTWARE MAINTENANCE

During its life time, the software is maintained by the manufacturer, i.e. known bugs will be
corrected, functions enhanced or new functions added. Therefore, PinchPilot updates will be
available from time to time. New releases can be delivered, e.g. when the device is calibrated
by the manufacturer or an authorised partner. Please ask about a quotation (see "Contact
information").
Version 2.58 or later fulfils all functions described herein.
5.9

SOFTWARE PLUG-INS

Additional functions can be added via plug-ins. Installed plug-ins can be activated/
deactivated in menu "Extras/ Options/ Plug-Ins". A detailed setting is offered in the lower
display of the menu "Extras".
An useful option for evaluating result data is the export function. All values of the result table
of a measurement are exported (appended) into an export data file.
Version 7.1
Handbuch / Manual FM200
Tab. 5.3: Settings for measuring mode
Selectable values
Limit designation
Active/ not active
Single/ double/ triple measurement
Active/ not active
Active/ not active
Manual (button "Save")
Save (always)
Discard (never)
Archive: FM200_DE_EN_V7.1
Seite 86 von 99