Sensor Data; Sensor Maintenance - Drivetest Fm200 Handbuch

Drive Test GmbH München
2.3

SENSOR DATA

Basic sensor specific data is stored in a non-volatile memory (EEPROM), situated in the
sensor's connector (15-pol. Sub-D):
Force adjustment data
Sensor ID, version, serial no.
Guidelines category
Date of last calibration
Number of measurements
2.4

SENSOR MAINTENANCE

The device has to be protected from moisture, dirt and solar radiation. It is designed to
withstand normal handling and transportation, nevertheless excessive shock or load (>250 N)
can damage it and should be avoided. Most of the parts are fabricated from durable
aluminium or POM. To clean the device, wipe it with a damp cloth. Avoid contact to acids and
thinner.
Version 7.1
Handbuch / Manual FM200 Seite 61 von 99
Archive: FM200_DE_EN_V7.1