Properties; Details - Drivetest Fm200 Handbuch

Drive Test GmbH München

5.5.3 Properties

Properties of measurement data are important attributes like the name of the customer, point
of measurement etc. All properties appear on the printed report. Without properties
measurement data can be easily mixed up and has little information value.
Properties are set under "File/ Properties". Changes are valid for the currently shown
measurement. Default settings will be inserted automatically during upload process.
Properties of a measurement data file:
Property
Guideline
Tester
Customer
Item
System
Measure Point
Depending on the guideline, the names may vary.
Additional properties are:
Remarks: Additional measurement information
Measuring Points: Designation of frequently used measurement points.
These names could be selected under "Measuring/ Measure Point".
All inputs are valid for the currently shown measurement. In addition, a set of properties can
be defined as a default setting. Default settings are inserted automatically when
measurements are uploaded. Default settings are guideline specific, i.e. only available in the
corresponding guideline.
For measurements that have to be executed periodically and include several measurement
points, usage of the sequence option is recommended. The sequence properties will be
inserted automatically into the property fields of all measurements of the sequence. Refer to
chapter "Software PinchPilot/ Sequence of measurements".

5.5.4 Details

In addition to the course of the force and the result values displayed in the main menu, there
is a variety of information details linked to the measurement. These details can be displayed
under "View/ Details". In case of malfunction, this information can be useful.
Version 7.1
Handbuch / Manual FM200
Meaning
Name of the applicable standard
Name or code of testing person
Name or code of customer/ dep. etc.
Identification of the item
Identification of the system
Identification of the measuring point
Seite 79 von 99
Example
EN14752:2015
Charles Clamp
London City Ltd.
Door 1
Automatic
Middle edge
Archive: FM200_DE_EN_V7.1