Pinchpilot Settings; Extras/ Options; Extras/ Settings - Drivetest Fm200 Handbuch

Drive Test GmbH München
5.6

PINCHPILOT SETTINGS

PinchPilot offers versatile settings. The default software installation settings ensure
reasonable values so that the user has to adapt very few values.

5.6.1 Extras/ Options

Table 5.2 shows the setting options and its meanings.
Submenu Value
Sensorbox Port (PC interface)
Sensorbox Bloc. No.
Sensorbox Serial No. in file name
Sensorbox Delete after upload
Sensorbox Change Guideline
Sensorbox Compression
Sensorbox Open last Upload
Sensorbox Auto directories/ None
Sensorbox Auto directories/ For Block
Sensorbox Auto directories/ For Date
Tester Properties Logo
Tester Properties Properties appear in report
Print Margins, Logo margins
Print Charts
Print Punch marks
View Display options
View Appearance
View Average
Plug-ins Export result data
Plug-ins Import label data
Plug-ins PLC remote control
Plug-ins Database export, production

5.6.2 Extras/ Settings

These settings are guideline specific and depend on the guideline of the actually loaded
measurement. The user can modify the scaling and setting values which are not defined in
the standard the guideline is based on.
Version 7.1
Handbuch / Manual FM200
Tab. 5.2: Setting options and its meanings
Meaning
Depending on COM port used (for changes
to become effective, a restart of PinchPilot
is required)
Number of upload session; adapt when
needed
Select this feature when several sensors
are in use with one display unit
Delete measurement data after uploading
data into PC (should be set)
Redefines guideline when uploading (refer
to chapter "Changing the guidelines")
Compressed data transfer for shorter
transfer duration, set active
Load and display the last measurement
after an upload session
No automatic folder creation
Automatic folder creation according to bloc
no.
Automatic folder creation according to date
Corporate logo, if available and desired
Text appears in the right, upper field of the
report, e.g. postal address etc.
Set margins for printed report
One or all diagrams printed; set all
Punch marks, set active
Display options
Display appearance
Time for averaging of force values for PC
controlled measuring, refer to chapter
"Measuring with PinchPilot"
Refer to chapter "Software plug-ins"
Reserved
Reserved
Reserved
Archive: FM200_DE_EN_V7.1
Seite 81 von 99