Changing The Guidelines; Software Evaluation - Drivetest Fm200 Handbuch

Drive Test GmbH München
Example for the matching (update) process (object 1105):
Directory structure before
matching (updating)
Pinchdata
2016-12-19
Query:
In case of danger of data loss, a message appears and offers the possibility to cancel the
required action. This warning message can be suppressed.
Report:
In case of three or less single measurements a graphic presentation can be activated in
addition to the result table.
Routing slip:
A routing slip can be created including all measuring points. It can be used to guide through
all measurements. To ease later identification the number of the measurement should be
entered into the routing slip. The template of the routing slip is a HTML file. It can be replaced
or modified by the user.

5.11 CHANGING THE GUIDELINES

In case of standard changes applicable to pinch force measurement, Drive Test will adapt the
related PinchPilot guidelines. This is ensured by permanent observation of the relevant
standards. PinchPilot software upgrades could be done e.g. when the device is calibrated by
Drive Test or by an authorised partner. Please ask about a quotation (see "Contact
information").
The evaluation result of the display unit may differ from the one of the PinchPilot software,
due to the fact that a complete implementation of all details and exception of the standard
requirements is performed only by PinchPilot.

5.12 SOFTWARE EVALUATION

Typical force flow. Es gilt:
Version 7.1
Handbuch / Manual FM200
165 01.ppd
165 02.ppd
165 03.ppd
max. force < F
Directory structure after
matching (updating)
Pinchdata
1105
2016-12-19
165 01.ppd
165 02.ppd
165 03.ppd
perm
p
Seite 90 von 99
Archive: FM200_DE_EN_V7.1