Seb2.2 Option: Analog Interface 0509; Turn Off/ On - Drivetest Fm200 Handbuch

Drive Test GmbH München

3.10 SEB2.2 OPTION: ANALOG INTERFACE 0509

The optional analog interface 0509 is available only for SEB2.2 display unit.
Features of the analog interface 0509 are:
BNC output connector, isolated from display unit SEB2.2
Output of analog value during measurement
Range: 0 – 4000 mV
Refresh rate according to sensor used (250 or 500 S/s)
Adjustable force range: 250N, 500N, 1000N, 2000N

3.10.1 Turn off/ on

To turn on and turn off the analog interface, please follow these steps:
Turn on: Move the sliding switch to the left side (towards the BNC connector).
Turn off: Move the sliding switch to the right side.
In order to reduce current consumption, turn the analog interface off when not used.
Version 7.1
Handbuch / Manual FM200 Seite 70 von 99
Archive: FM200_DE_EN_V7.1