Gas Conversion; Preliminary Operations - Sime UNIQA REVOLUTION 25 Installations-, Gebrauchs- Und Wartungsanleitung

7.6

Gas conversion

models can be transformed from operat-
UNIQA REVOLUTION 25
ing with G20 (methane) to G31 (LPG), by installing the "Nozzle kit
for G31" code 8059250, to be ordered separately from the boiler,
also modifying "PAR 03" .
m
CAUTION
The maintenance interventions described must ONLY
be carried out the professionally qualified personnel.
a
WARNING
Before carrying out any interventions described:
– set the main system switch to "OFF"
– close the gas valve
– make sure that no hot parts inside the appliance are
touched.
OFF
7.6.1

Preliminary operations

To carry out the conversion:
– remove the screws (1), pull the front panel (2) forwards and
release it from the top by lifting it
2
Fig. 43
1
Fig. 44
– remove the screws (3) securing the control panel (4)
– move the panel (4) upwards (a) but keeping it in the side
guides (5) to the end of travel
– bring it forwards and down (b) until it is horizontal
4
b
3
– unscrew the screws (6) and remove the panel (7) carefully
6
7
5
a
Fig. 45
Fig. 46
37