Product Specifications - Arthrex AR-1650S Gebrauchsanleitung

INSTRUCTIONS FOR USE
c. Ensure device is securely attached and locked to OR Table accessory rail before
transferring patient.
d. Different OR tables may have different table rail dimensions depending on
country of manufacture/use. Ensure that the correct Table Clamps designed for
use with the specific OR table rail is used.
e. Pinch points and crushing points are indicated on the device via labelling
section.
f. Do not exceed safe working load shown in the product specification table.

4.2 Product Specifications:

Mechanical Specifications
Product Dimensions
Material
Safe Working Load on the device
Overall Weight of Complete Device
Storage Specifications
Storage temperature
Storage Relative humidity range
Operating temperature
Operating Relative humidity range
Electrical Specifications
Not Applicable.
Software Specifications
Not Applicable.
Compatibility Specifications
Operating Room Table Compatibility
Note: Consult the corresponding IFU for the products mentioned in the above table.
Document Number: 80028287
Version: B
Description
72" x 12" x 12" (183 cm x 30.5 cm x 30.5 cm)
303 Stainless Steel, 6061 T6 Aluminium, Nylon
Plastic, 18-8 Stainless Steel.
40 lbs. (18 kg)
30 lbs. (13.6 kg)
Description
-29ᵒ C to +60ᵒ C
15% to 85%
This device is intended to be used in a controlled
Operating Room environment.
Description
Not Applicable.
Description
Not Applicable.
Description
The Shoulder Suspension Tower System
Arthrex
is compatible with the following surgical table
rail styles: US, UK, EU, Denyer, Japan
Page 35
Issue Date: 27 MAR 2020
Ref Blank Template: 80025118 Ver. E