Warming Up The Machine - Optimum Optidrill B 24H Betriebsanleitung

3.6.2 Warming up the machine

ATTENTION!
If the drilling machine and in particular the drilling spindle is immediately operated at
maximum load when it is cold it may result in damages.
If the machine is cold, e.g. directly after having transported the machine, it should be warmed
up at a spindle speed of only 500 1/min for the first 30 minutes.
B24H | B24HV | B28H | B28HV GB
Version 2.2.6 - 2020-07-21 Translation of the original instructions 107