WARNING!
Before starting the machine you must be sure that
no dangers generated for persons,
the machine is not damaged.
6.2
Inspection and maintenance
The type and level of wear depends to a large extent on the individual usage and operating
conditions. Any indicated intervals therefore are only valid for the corresponding approved con-
ditions.
Interval
Where?
Start of shift
After each
maintenance or
repair work
Every month
GB
B24H | B24HV | B28H | B28HV
126
What?
How?
Examination for outside damages.
Safety check on page 14
Lubricate the drill column regularly with commercial oil,
machine oil, engine oil.
Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Abb.6-1:
Drilling machine
Translation of the original instructions
Drilling column
Toothed rod
Maintenance
Version 2.2.6 - 2020-07-21