Maintenance; Safety; Preparation - Optimum OPTidrill DH 40CT Betriebsanleitung

6

Maintenance

In this chapter you will find important information about

Inspection

Maintenance

Repair
of the drilling and milling machine
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for

operational safety,

failure-free operation,

a long working life of the drilling and milling machine and

the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
ENVIRONMENTAL PROTECTION
During work on the spindle head, please make sure that

collecting containers with sufficient capacity for the amount of liquid to be collected
are used.

Liquids and oils should not be split on the ground.
Clean up any spilt liquid or oils immediately using proper oil-absorption methods and dispose of
them in accordance with current environmental protection regulations.
Collect leakages
Do not re-introduce liquids spilt outside the system during repair or as a result of leakage from
the reserve tank; collect them in a collecting container for disposal.
Disposal
Never dump oil or other environmentally hazardous substances which are harmful to the envi-
ronment in water inlets, rivers or channels.
Used oils must be delivered to a collection centre. Please consult your supervisor for further
information on your nearest collection point.
6.1

Safety

WARNING!
The consequences of incorrect maintenance and repair work may include:

extremely serious injuries to those working on the drilling and milling machine and

damage to the drilling and milling machine.
Maintenance and repair work on the drilling and milling machine must be carried out by
qualified technical personnel only.
6.1.1

Preparation

WARNING!
Only work on the drilling milling machine if it has been disconnected from the power

supply. Switching-off and securing the drilling milling machine on page 64
Attach a warning label.
EN DH 40CT
86 Translation of original instruction
Maintenance
Version 1.0.1 - 2021-07-06