Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
made from high-alloy high speed steel (HSS). You will achieve the ideal cutting speed by
selecting the correct rotation speed by hand.
We recommend using a machining technology paperback
ISBN 978-3-8085-1473-3 (example, only in German language available). In these reference
table books you will find all the necessary and additional information. Those machining technol-
ogy paperbacks should bridge the gap between the predominantly theory-oriented textbooks
and the with mostly low theoretical foundations written practice books and reference books.
4.5.2
Gear selector switch
The speed is selected by means of the gear selector switches. You obtain a total of 12 speed
ranges in connection with the turning direction switch.
INFORMATION
Observe the speed table on the milling drilling head when selecting the range of speed.
ATTENTION!
Wait until the spindle has come to a complete halt before changing the speed with the
gear selector switch.
A change of the gear ratio during operation can lead to the destruction of the gearbox.
4.6
Switching off the drilling milling machine
Press the push button Stop. For a long-term standstill of the drilling milling machine switch it
off at the master switch.
4.7
Drill depth stop
Use the drilling depth stop when drilling
several holes of the same depth.
The spindle can only be lowered to the
set value.
EN
DH 40CT
76
Indicator drilling
depth
Setting screw for
drill depth stop
Translation of original instruction
Img.4-2:
Drill depth stop
Version 1.0.1 - 2021-07-06
Operation
Werbung
Inhaltsverzeichnis
