Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Interval
Where?
the first time
after 20 hours of
operation, then
annually
Every month
Every month
Every month
EN
DH 40CT
88
What?
How?
Use an appropriate collecting vessel with a capacity of at
least 3 liters when performing the oil change.
Unscrew the oil filling screw.
Swivel the drilling head in order to allow the oil to drain of.
Swivelling the spindle head on page 78
Img.6-2:
Oil filling screw
Refill the spindle head after having drained the oil. Pay atten-
tion to the correct level.
Ensure that the clamping screws for swivelling the spindle
head are firmly tightened.
Img.6-3:
Clamping screw to slew the drilling head
Lubricate the drill column regularly with commercial oil.
Lubricate the toothed rod regularly with commercial grease
(e.g. friction bearing grease).
Lubricate all oiler cups with machine oil, do not use grease
guns or the like.
Operating material on page 67
Translation of original instruction
Oil filling screw/Aera-
tion screw
Operating material on page 67
Clamping screw
right
Version 1.0.1 - 2021-07-06
Maintenance
Werbung
Inhaltsverzeichnis
