One-Component Paint; Checks - Optimum OPTidrill DH 40CT Betriebsanleitung

conductor (N) is connected to a phase.
This might have the following results:

The motor is getting hot very rapidly.

Increased motor noises.

The motor has no power.
The guarantee will become null and void if the machine is connected incorrectly.
ATTENTION!
Check the rotary field respectively the turning direction of the motor.
The switch position of the rotation selector switch for right-handed rotation (R) has to
turn the drill spindle clockwise.
3.6.3

One-component paint

The machine is lacquered with a one-component paint. Take this criterion into account when
selecting your cooling lubricant and cleaning the machine.
A one-component paint with added solvent sets when the solvent evaporates.
As soon as the paint is applied, the solvent escapes into the air. The binding agent becomes
felted and a dry film is formed. This process is reversible, i.e. the binding agent can always be
re-softened.
A two-component paint also consists of binding agent and solvent. However, the paint only
dries when a setting agent is added. This process is not reversible, i.e. the binding agent can-
not be re-softened.
The company Optimum Maschinen Germany GmbH does not assume any guarantee for sub-
sequent damages due to unsuitable cooling lubricants.
3.6.4

Checks


Check the drilling milling machine as indicated under

Check the drilling milling machine as indicated under
Version 1.0.1 - 2021-07-06

Safety check on page 62.

Oil level on page 87.
Translation of original instruction
DH 40CT EN
73