5
Maintenance
In this chapter you will find important information about
Inspection
Maintenance
Repair
of the drilling- milling machine.
ATTENTION!
Properly performed regular maintenance is an essential prerequisite for
operational safety,
failure-free operation,
long service life of the drilling- milling machine and
the quality of the products which you manufacture.
Installations and equipment from other manufacturers must also be in good order and condition.
5.1
Safety
WARNING!
The consequences of incorrect maintenance and repair work may include:
extremely serious injuries to those working on the drilling- milling machine and
damage to the drilling- milling machine.
Only qualified personnel should carry out maintenance and repair work on the drilling-
milling machine.
5.1.1
Preparation
WARNING!
Only work on the drilling- milling machine if it has been disconnected from the power
supply.
Switching-off and securing the drilling- milling machine on page 58
Attach a warning label.
5.1.2
Restarting
Before restarting, run a safety check.
Safety check on page 57
WARNING!
Before starting the drilling- milling machine, you must check that there is no danger for
persons and that the drilling- milling machine is not damaged.
Version 1.0.1 - 2021-11-18
Translation of original instruction
MB4
EN
75