Inhaltsverzeichnis
Werbung
REAR SHOCK ABSORBER
2. Install:
Bush 1
G
Collar 2
G
Dust seal 3
G
NOTE:
Apply the molybdenum disulfide grease on
G
the bearing.
Apply the lithium soap base grease on the
G
bush, collars and dust seals.
Install the dust seals with their lips facing
G
outward.
3. Install:
Rear shock absorber
G
4. Install:
Bolt (rear shock absorber-frame) 1
G
Nut (rear shock absorber-frame) 2
G
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5. Install:
Bolt (rear shock absorber-relay arm) 1
G
Nut (rear shock absorber-relay arm) 2
G
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
6. Install:
Rear frame 1
G
Bolt [rear frame (upper)] 2
G
Bolt [rear frame (lower)] 3
G
7. Tighten:
Screw (air filter joint) 1
G
5 - 64
CHAS
56 Nm (5.6 m · kg, 40 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
32 Nm (3.2 m · kg, 23 ft · lb)
29 Nm (2.9 m · kg, 21 ft · lb)
3 Nm (0.3 m · kg, 2.2 ft · lb)
Werbung
Inhaltsverzeichnis
