Inhaltsverzeichnis
Werbung
SWINGARM
8. Install:
Bolt (connecting rod) 1
G
Plain washer 2
G
Nut (connecting rod) 3
G
NOTE:
Apply the molybdenum disulfide grease on
G
the bolt.
Do not tighten the nut yet.
G
9. Install:
Bolt (rear shock absorber-relay arm) 1
G
Nut (rear shock absorber-relay arm) 2
G
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
10. Tighten:
Nut (connecting rod) 1
G
11. Tighten:
Nut (relay arm) 1
G
12. Install:
Cap 1
G
NOTE:
Install the cap (right) with its mark a facing
forward.
5 - 56
CHAS
53 Nm (5.3 m · kg, 38 ft · lb)
80 Nm (8.0 m · kg, 58 ft · lb)
80 Nm (8.0 m · kg, 58 ft · lb)
Werbung
Inhaltsverzeichnis
