Inhaltsverzeichnis
Werbung
5
E
4
CAMSHAFTS
Fit the timing chain 3 onto both camshaft
G
sprockets and install the camshafts on the
cylinder head.
NOTE:
The camshafts should be installed onto the
cylinder head so that the exhaust cam
sprocket punch mark c and the intake cam
sprocket punch mark d align with the sur-
face of the cylinder head.
CAUTION:
Do not turn the crankshaft during the
camshaft
installation.
improper valve timing will result.
Install the clips and camshaft caps 4.
G
Bolt (camshaft cap):
10 Nm (1.0 m • kg, 7.2 ft • lb)
NOTE:
Apply the engine oil on the thread and con-
G
tact surface of the bolts (camshaft cap) 5.
Tighten the bolts (camshaft cap) in a criss-
G
cross pattern.
CAUTION:
The bolts (camshaft cap) must be tight-
ened evenly, or damage to the cylinder
head, camshaft caps, and camshaft will
result.
2. Install:
Timing chain tensioner
G
Installation steps:
While pressing the tensioner rod lightly
G
with fingers, use a thin screwdriver and
wind the tensioner rod up fully clockwise.
4 - 27
ENG
Damage
or
Werbung
Inhaltsverzeichnis
