Inhaltsverzeichnis
Werbung
Å
ı
FRONT BRAKE AND REAR BRAKE
5 - 24
2. Install:
Brake hose holder 1
G
Screw (brake hose holder) 2
G
1 Nm (0.1 m · kg, 0.7 ft · lb)
CAUTION:
ACHTUNG:
After installing the brake hose holders,
make sure the brake hose does not contact
the spring (rear shock absorber). If it does,
correct its twist.
Brake fluid
1. Fill:
Brake fluid
G
Until the fluid level reaches "LOWER"
level line a.
Recommended brake fluid:
DOT #4
WARNING
Use only the designated quality brake
G
fluid:
otherwise, the rubber seals may deterio-
rate, causing leakage and poor brake per-
formance.
Refill with the same type of brake fluid;
G
mixing fluids may result in a harmful chem-
ical reaction and lead to poor performance.
Be careful that water does not enter the
G
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in vapor lock.
CAUTION:
ACHTUNG:
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
Å Front
ı Rear
CHAS
Werbung
Inhaltsverzeichnis
