Coolant Pump; Checks; Warming Up The Machine - Optimum OPTIdrill B 50GSM Betriebsanleitung

4.7

Coolant pump

ATTENTION!
The coolant pump also delivers if it turns in the wrong direction. Due to the wrong
turning direction the pump is destroyed within a short time.
Img.4-4: Coolant pump of geared drill
Img.4-5: Coolant filler hole
4.7.1

Checks


Check the geared drill as indicated under

Check the geared drill as indicated under
sleeve on page 100.
4.8

Warming up the machine

ATTENTION!
If the geared drill and in particular the drilling spindle is immediately operated at
maximum load when it is cold it may result in damages.
If the machine is cold, e.g. directly after having transported the machine, it should be warmed
up at a spindle speed of only 500 1/min for the first 30 minutes.
EN
B50 GSM
82
Coolant pump
Fill in coolant

Safety check on page 69.

Oil level of the gear of the drilling spindle
Translation of original instruction
Assembly
Version 1.1.4 - 2021-01-04