Inhaltsverzeichnis
Werbung
3.7.1
Warming up the machine
ATTENTION!
If the drilling machine and in particular the drilling spindle is immediately operated at
maximum load when it is cold it may result in damages.
If the machine is cold, e.g. directly after having transported the machine, it should be warmed
up at a spindle speed of only 500 1/min for the first 30 minutes.
D17 Pro│D23 Pro│D26 Pro│D33 Pro
EN
Version 1.0.3 - 2020-07-14
Translation of original instruction
89
Werbung
Inhaltsverzeichnis
