Deditec USB-BITP-200 Hardware Dokumentation Seite 72

4.2.2.1.5.1. Module configuration 2
1. With the
"Edit"
configurate additional settings.
2. The
baudrate for the module communication can be configured
here.
3. The
address mode
module address.
4. The
module address
5.
Response-Address
send answer messages
6. With
"Apply" all settings will be saved to the configuration
button a window will open there you can
determinate the number of bits for the
is the CAN address of the module
is the address to which the module will
Software | Seite 72