Firmware Update | Seite - Deditec USB-BITP-200 Hardware Dokumentation

1. Select the Interface of the module of the
Command (Key)
U
S
C
E
V
Note:
1) The current selected interface will be displayed in the last line
(Selected Device = USB)
2) Press key Q
Sticks, USB-Logi-500, ..)
3) In order to flash products of the RO-CAN-Series, you have to
connect the module with your PC via the CAN/SER adapter.
2. Additional options
Command (Key)
D
P
3. Select the module which you want to flash
Command (Key)
M
Interface
USB-Interface
Serial Interface (RS-232 / RS-485)
CAN-Interface
Ethernet-Interface
USB2-Interface
to flash "non-RO-Series-products" (USB-Mini-
Description
Flasher runs in DEBUG mode
Therefore, additional information will be
displays
Reads the current firmware of connected
DEDITEC products
Description
Flash the RO-Interface module
RO-Series
(RO-Series only)

Firmware update | Seite

20