Deditec USB-BITP-200 Hardware Dokumentation Seite 233

Analog Outputs
Windows
delib_cli AO 7 4711
->analog output 8 will be set to the decimal value 4711
delib_cli AO 6 0x4711
->analog output 7 will be set to the hexadecimal value 0x4711
delib_cli AO 7 3.7V
-> the voltage of analog output 8 will be set to 3,7 Volt
(the comma "," and the dot "." can be used for decimal separation)
delib_cli AO 7 13.3mA
-> the current of analog output 8 will be set to 13,3 mA
(the comma "," and the dot "." can be used for decimal separation)
Linux
sudo delib_cli_usb AO 7 4711
-> analog output 8 of an USB-Module will be set to the decimal value 4711
delib_cli_eth AO 6 0x4711
-> analog output 7 of a RO-ETH-Module will be set to the hexadecimal value 0x4711
Software | Seite 233