Module Configuration - Deditec USB-BITP-200 Hardware Dokumentation

4.2.3.5.1. Module configuration

1. With the
"Edit"
configurate additional settings.
2. The
baudrate for the module communication can be configured
here.
3. The
address mode
module address.
4. The
module address
5.
Response-Address
send answer messages
6. With
"Apply" all settings will be saved to the configuration
button a window will open there you can
determinate the number of bits for the
is the CAN address of the module
is the address to which the module will
Software | Seite 125