Set Up An Encryption - Deditec USB-BITP-200 Hardware Dokumentation

4.2.8.2.2.2. Set up an encryption

In order to be able to process important module settings (for
example network configuration) via TCP, the communication
between the module and the PC must be in the so-called encrypted
admin mode.
For this purpose, a password for encryption must be configured in
the module and on the PC side.
This configuration can optionally be created by the automatic wizard
or manually.
Manual configuration
In the case of manual configuration, a password for encryption must
be defined on the module and PC side.
Step 1 - Configuration module-side
First, the module is configured via the web interface. Enter the IP
address of the module (delivery state 192.168.1.1) in an Internet
browser.
If an authentication is necessary, log in (delivery state: user = admin
+ password = admin).
Now open the security settings (Configuration -> Security)
Software | Seite 182