PUTTING ON THE
PATCH
USE OF BOAT AFTER
REPAIR
WARNING
5. RIGID INFLATABLE BOATS: SMALL REPAIRS ON THE HULL
The small scratches can be reduced or removed with polish or other appropriate products.
The deeper scratches can be repaired with polyester mastic or repair gelcoat. In this case, ask your
dealer.
NOTE:
Z Nautic SAS with capital of 7,095,000 euros - Toulouse Trade Register 812 206 340. 2, chemin de la Val Priout. 31450 AYGUESVIVES - FRANCE
➢ When the 3rd layer is dry, apply the patch without pressing and adjust
the position, if required.
➢ Press out the air bubbles which may have formed under the patch.
➢ Smooth the patch with a round object (ex: a spoon) starting from the
center of the patch.
➢ Clean the excess glue with a solvent.
➢ Do not expose the repair to sun or rain.
➢ Let dry for 24 hours before inflating.
- Do not leave the tube in the sun or next to heat sources or direct flames.
- Always work in a ventilated area, avoid inhaling glue vapors or swallowing
it. Avoid contact with the skin or the eyes.
For major repairs, take your boat to a dealer who can perform after sales
service.