Zodiac OPEN 3.1 Eignerhandbuch Seite 51

In a "head on" sea In a "following" sea
- load the bow, and if necessary, adjust the - load the stern, and if necessary, adjust the
engine's inclination engine's inclination
- the tilt pin should be in the 1st or 2nd hole - the tilt pin should be in the 3rd or the 4th hole
position position
Negative TRIM Positive TRIM
Do not operate the boat at high speed with a negative trim setting (low
bow). This can cause the boat to list and may result in instability in
turns. Use a negative trim setting to shift from travelling speed to
WARNING
hydroplaning speed, and at lower speeds in chop (if your engine is
equipped with an electric trim).
Z Nautic SAS with capital of 7,095,000 euros - Toulouse Trade Register 812 206 340. 2, chemin de la Val Priout. 31450 AYGUESVIVES - FRANCE