Certification - Identification; Manufacturer's Id Plate - Zodiac OPEN 3.1 Eignerhandbuch

APPROVAL / CERTIFICATION / IDENTIFICATION
Our boats comply with ISO standard 6185, established by the International Standards Organization, and
with European. Directive 2013/53/EU.
We are also a member of the American Nautical Manufacturers Association (NMMA), the French
Nautical Industries Federation (FIN) and the Association for Eco-Responsible Yachting (APER
Plaisance) which allows owners have their boat (registered in France) dismantled free of charge at the
end of its service life.
Record below the data indicated on the manufacturer's plate provided on the inside of the transom. You
may need them to help identify your boat for insurance purposes in case of theft or for after-sales service.
Carefully record the model (1) and the serial number (2) of your boat, and the ID number provided on
the plate outside the transom, near the outboard (XDC) (11).
1
3
5
6
7
9
The indications on the manufacturer's plate on the transom are important:
They give information about limitations imposed by local or national regulations.
However, these indications are not a complete list: the safety requirements (the boat's mandatory
safety equipment, maximum authorized distance you can navigate from a shelter, etc.) may change
according to the country or state Always refer to local regulations to be informed on additional
requirements.
Z Nautic SAS with capital of 7,095,000 euros - Toulouse Trade Register 812 206 340. 2, chemin de la Val Priout. 31450 AYGUESVIVES - FRANCE
 Manufacturer's ID plate

MANUFACTURER'S ID PLATE

2
4
8
10
11