►
Dismount rod length measuring instrument 11, see
Fig. 7.
Fig. 7
Assembly
Assembling the set screw starter
►
Screw together the set screw and the starter so
that they are hand-tight, see Fig. 8.
Fig. 8
Note
The set screw starter is not intended for loosening set
screws. If the working end becomes loose, it can be
tightened until hand-tight, without tools. Use the revi-
sion screwdriver FW193R to loosen the set screws.
Mounting the reduction lever
►
Mount reduction lever 4, see Fig. 9.
Fig. 9
5