Playback Via Airplay 2 Technology - Canton Smart Soundbar 10 Bedienungsanleitung

English
Playback via AirPlay resp. AirPlay 2 technology
Note: AirPlay resp. AirPlay 2 is only available on devices of the second generation (Soundbar 10 S2).
Requirements to play music using AirPlay 2 technology:
• iPhone, iPad, iPod touch or HomePod with iOS 11.4 or higher.
• Apple TV 4k or Apple TV HD with tvOS 11.4 or higher
• Mac or PC with iTunes 12.8 or higher resp. Mac with macOS Catalina or higher.
Playback on Smart Soundbar 10 (and other devices):
To play your music using the Soundbar 10, start the playback of the desired title in a media app on your (mobile) device.
1
Open the Control Center on your Apple device . Swipe from the top right corner (iOS 12 or higher) or from the bottom (iOS 11 or lower) towards
2
the center of the display.
Select the AirPlay symbol in the Audio Card, and in the dialog that opens select the speaker(s) resp. amplifier(s) which you want to use for play-
3
back.
To start music playback on one or more AirPlay-enabled speaker(s) via Mac, Apple TV or Apple Music, please refer to the following support page:
https:/ /support.apple.com/en-ca/HT202809
Notes: • Use Siri on your iPhone, iPad, HomePod, or Apple TV to control the Soundbar 10 with just your voice.
• The Smart Soundbar 10 supports only audio streaming, no video streaming.
84