Bt Reset [Bre]; Autoplay [Apl] - Canton Smart Soundbar 10 Bedienungsanleitung

BT Reset [BRE]

This function is to delete all Bluetooth
system to factory settings.
Caution: ALL settings you have made and stored on the Soundbar regarding the BT audio module will be deleted.
To perform the reset please proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Bluetooth Setup [BT] and confirm with the "OK" button.
3
Use the " " or " " button to select the menu item BT Reset [BRE] and confirm with the "OK" button.
4
The menu BT Reset is displayed and the status indication shows "No", the display shows [NO].
If you want to cancel the reset precedure, press the "OK" button or press the "M" button.
5
If you want to perform the reset, select "Reset all" using
6
The OSD shows "Please Wait", the display still shows [YES]. After a few seconds the Soundbar 10 jumps back to the menu "Bluetooth Menu"
7
[BT].
Press the "M" button to exit this menu item.
8

Autoplay [APL]

If this function is activated [ON], the playback of a previously connected device with Bluetooth® wireless technology will start automatically
when the Soundbar 10 is switched on. This starts the playback of the recently opened media player app (music player) on the (mobile) device.
Do the following to activate resp. deactivate this function:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate to the menu Wireless Setup [WIS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Bluetooth Setup [BT] and confirm with the "OK" button.
3
Use the " " or " " button to select the item AutoPlay [APL] and confirm with the "OK" button.
4
Select the wanted parameter [ON] resp. [OFF] using the "+" or "–" button.
5
Press the "M" button to exit this menu item.
6
Note: Depending on the operating system of the (mobile) device and the app, the app must run in the foreground or at least in the
background. If there is no app or one that does not support background operation, playback will not start.
wireless technology related settings and paired devices stored on the Smart Soundbar 10 and reset the
®
" " or " " key and press the "OK" button. The display shows [YES].
English
3 1 11