Using Airplay 2 Technology - Canton Smart Soundbar 10 Kurzanleitung

USING AirPlay 2 TECHNOLOGY

With Apple AirPlay technology, you can play audio content over the wireless
network (WLAN) using your Smart Soundbar 10.
Additionally, AirPlay 2 technology offers you the possibility to play your con-
tent on several loudspeakers and/or amplifiers synchronously.
Connecting the Smart Soundbar 10 to the WLAN (WiFi network) via iPhone,
iPad or iPod touch.
To connect your Smart Soundbar 10 to your wireless network (WLAN) via
iPhone, iPad or iPod touch, please proceed as follows:
Connect your Soundbar 10 to the power outlet and wait until the display
1
shows [NET] and [SET].
On your iPhone, iPad or iPod touch, select „Settings" and then „Wi-Fi"
2
(WLAN).
Under the menu item „SET UP NEW AIRPLAY SPEAKER" select the Smart
3
Soundbar 10 as the device to be installed.
The „AirPlay Config..." window opens.
4
a. Under „Network" select the network to which you want to con-
nect the Smart Soundbar 10.
b. Under "Speaker name" enter the name (synonym) you want to
assign to the Soundbar 10.
c. Optionally, you can assign a password under „SPEAKER PASS-
WORD".
d. Select the function „Next" and wait (approx. 30 seconds) until the
Soundbar 10 shows [WIF] / [CON] in the display.
Finalize the registration process in the „Configuration finished" window
5
that opens by pressing the „Done" button. The Smart Soundbar 10 is now
connected to your WLAN (Wi-Fi network) and ready for use.
English
3 4 1